Today we're excited to have a guest post from knitwear designer Talitha Kuomi. Learn more about Talitha on her website talithakuomi.com, on Facebook, or find her on Ravelry as Talithakuomi.
I was a painfully shy child who buried herself in bike rides and Nancy Drew books. Both were good ways to avoid the awkwardness of conversation and the pressure of direct eye contact. I found gazing from the sidelines so much less stressful than interacting. Eventually, it got lonely watching life rather than actually living. I began to choose to push myself into social situations and found that in exchange for enduring sweaty palms and knocking knees, I got the warmth of friendship and the rush of small daily adventures.
Leaping ahead, I find it ironic that I wound up as one of the final 12 in the first season of The Fiber Factor. Honestly, I filled out the application because it scared me. It asked me to consider things I had no answers to. That challenged me. To questions like ‘what is your design philosophy?’, my gut reaction was, ‘my what?’. Later, when Josh Bennett asked me who I was as a designer, I tripped and stumbled trying to compose a clear answer. The whole competition felt like that to me, hitting the wall of not knowing how to respond over and over again. Having never seen a reality show of any kind, I was completely unprepared. But, if you ask me now why I design what I do and how that relates to my life, I can tell you. That was the real ‘win’ of the experience for me.
I designed ‘Lind’ as a tribute to all the books that let me walk safely through their adventures before I was brave enough for adventures of my own. The extra wide cables require a little trick to make them work and the slight slouch at the crown keeps them dramatic. A little drama is a good thing.
Lind
by Taltitha Kuomi
Abbreviations
Approx: Approximately
Circ: Circumference
Cn: Cable needle
CO: Cast on
Dec(‘d): Decrease(d)
Dpn(s): Double pointed needle(s)
K: Knit
K2tog: Knit two together—1 sts dec’d
K3tog: Knit three together—2 sts dec’d
LH: Left hand
Meas: Measures
P: Purl
Pc: Piece
Pm: Place Marker
P2tog: Purl two sts together—1 sts dec’d
Rem: Remain
Rep(‘d): Repeat(ed)
RH: Right hand
Rm: Remove marker
Rnd(s): Round(s)
Sm: Slip marker
St(s): Stitch(es)
Yo: Yarn over
Yarn
1 skein Louet Gems Worsted (100% merino; 100 g = approx 175 yd) Color shown is ‘Champagne’.
Needles
16” circular needle size US 4/3.5 mm or size needed to get gauge.
16” circular needle size US 7/4.5 mm or size needed to get gauge.
One set double pointed needles size US 7/4.5 mm or size needed to get gauge.
Gauge
24 sts and 28 rows = 4” in Stockinette stitch worked in the round on larger needles
Size
XS/S (M, L/XL)
Meant to fit head circumference: 18-19.5 (20-21.5, 22-24)”
Actual hat circumference (measured unstretched): 14 (15.5, 17)”
Shown in size XL on my 23.5” head.
Notes
Hat is knit in the round from the brim up. Extra wide cables are knit with dropped yarn overs to keep them from puckering too much. Cables decrease in size at the crown making for a bit of intentional slouch at the top.
Ribbing
Using smaller needles, CO 110 (120, 130) sts. Pm and join to knit in the round.
Rib rnd: [P6, knit 3 (2, 3) sts, *p2, k2; rep from * two (three, three) more times, knit 1 (0, 1) st] rep between brackets to end (4 more times), sm.
Rep Rib rnd, until pc meas approx 3”.
Body of Hat
Change to larger circular needles.
Rnd 1: Rm, knit 11 (12, 13) sts, pm, *P6, knit 16 (18, 20) sts; rep from * to last 5 (6, 7) sts, knit to end, sm.
Rnds 2-12: *P6, knit 16 (18, 20) sts; rep from * to end, sm.
Rnd 13: *P6, slip 8 (9, 10) sts to cn, pull to front of work, yo, knit 8 (9, 10) sts, slip these 8 (9, 10) newly knit sts from RH to LH needle, drop the yo, slip these same 8 (9, 10) sts from LH needle to RH needle, yo, knit 8 (9, 10) from cn, slip these 8 (9, 10) newly knit sts from RH to LH needle, drop the yo, slip these same 8 (9, 10) sts from LH to RH needle; rep from * to end, sm.
Rnds 14-20: *P6, knit 16 (18, 20) sts; rep from * to end, sm.
Rnd 21: *P6, knit 7 (8, 9), (k2tog) 2x, knit 5 (6, 7); rep from * to end, sm—100 (110, 120) sts rem
Rnds 22-30: *P6, knit 14 (16, 18) sts; rep from * to end, sm.
Rnd 31: *P6, slip 7 (8, 9) sts to cn, pull to front of work, yo, knit 7 (8, 9) sts, slip these 7 (8, 9) newly knit sts from RH to LH needle, drop the yo, slip these same 7 (8, 9) sts from LH needle to RH needle, yo, knit 7 (8, 9) from cn, slip these 7 (8, 9) newly knit sts from RH to LH needle, drop the yo, slip these same 7 (8, 9) sts from LH to RH needle; rep from * to end, sm.
Rnd 32: *P6, knit 14 (16, 18); rep from * to end, sm.
Crown Decreases
Change to dpns.
Rnd 33: *P2tog, p2, p2tog, knit 5 (6, 7), (k2tog) 2x, knit 5 (6, 7); rep from * to end, sm—80 (90, 100) sts rem.
Rnd 34: *(P2tog) 2x, (k2tog) four (six, eight) times, knit 4 (2, 0) sts; rep from * to end, sm—50 sts rem.
Rnd 35: *P2, (k3tog) 2x, k2tog; rep from * to end, sm—25 sts rem.
Rnd 36: *P2tog, k3tog; rep from * to end, sm—10 sts rem.
Cut yarn leaving a 12” tail. Thread tail through rem 10 sts. Pull snug and tie off.
Finishing
Weave in ends. Wet block the body of the hat to open up the cabling a bit, being careful not to over block the ribbed brim.
'Lind’ is Swedish for ‘winding’.
Pattern and images © talithakuomi 2014 All rights reserved, used with permission. Pattern for personal, non-profit use only.
Giveaway
This month we're giving away a
Nova Platina Interchangeable Set! To enter for your chance to win leave a comment on this post telling us which of Talitha's patterns you love best. Don't forget to leave your Ravelry ID so we can contact you if you're the winner. You can see all of Talitha's patterns on her
Ravelry page.
.jpg)
.jpg)
